Formcoat WB250 is a release agent for wooden, plastic and metal molds. It is ideal for use in concrete precast plants.
Formcoat WB250 provides easy form stripping, produces concrete surfaces that are stain-free, smooth and non-dusting and minimizes form clean-up time and maintenance costs.
Formcoat WB250 is available in 20, 200, 1000 litre packs.
30 - 70 m²/litre depending on formwork types and type of application.
Formcoat WB250 should be stored in closed containers away of direct sunlight between 5 and 35°C.
Formcoat WB250 has a shelf life of 9 months from date of manufacture if stored in proper conditions and sealed drums.
Formwork must be cleaned of surface deposits, rust, concrete, oil or other materials. Inadequate cleaning may lead to surface blemishes. Coating new timber formwork with a polyurethane sealer will protect the formwork, increase service life and improve concrete surface finish.
Formcoat WB250 can be applied using roller, brush, sponge or spray application. Non-absorbent surfaces require a single application.
New, unsealed, timber surfaces may need recoating if the first application is absorbed into the timber. If the product is over applied, excess material should be drained and then carefully removed using a sponge or a cloth.
HEALTH AND SAFETY
Wear rubber gloves and protect eyes with goggles. Wash hands and skin with soap and water immediately after accidental contact.
In case of contact with eyes rinse immediately with plenty of water and seek medical advise.
This data sheet is for general guidance purposes only and may contain information that is inappropriate for certain conditions of use. Accordingly, all recommendations and suggestions are made without guarantee. Further information is available from our Technical Department.
Connect with Don Construction Products
Don Construction Products Inc.
Fax: +1 803 286 5432