Hyperplast 150EX is available in 5 gal (19 litre) containers as well as 275 gal (1,041 litre) and 330 gal (1,249 litre) IBC totes. Bulk supply in tanker trucks is also available upon request.
Hyperplast 150EX has a shelf life of 12 months from date of manufacture if stored at temperatures between 35˚F and 122˚°F (2°C and 50°C).
Hyperplast 150EX should be added to the concrete with the mixing water to achieve optimum performance.
An automatic dispenser should be used to dispense the correct quantity of Hyperplast 150EX to the concrete mix.
The recommended dosage of Hyperplast 150EX is 8 to 85 fl oz/100 Ib (520 - 5,525 ml/100 kg) of cement or cementitious materials in the mix including GGBFS, PFA or micro-silica.
Representative trials should first be conducted to determine the optimum dosage of Hyperplast 150EX to meet the performance requirements by using the materials and conditions in actual use.
EFFECTS OF OVER DOSAGE
Overdosage of Hyperplast 150EX will cause the following:
Ultimate concrete strength will not be adversely affected and will generally be increased provided that proper concrete curing is maintained.
HEALTH AND SAFETY
Hyperplast 150EX is not classified as a hazardous material. Hyperplast 150EX should not come into contact with skin and eyes.
In case of contact with eyes, immediately flush with plenty of water and seek medical attention.
This data sheet is for general guidance purposes only and may contain information that is inappropriate for certain conditions of use. Accordingly, all recommendations and suggestions are made without guarantee. Further information is available from our Technical Department.
Connect with Don Construction Products
Don Construction Products Inc.
Fax: +1 803 286 5432