Hyperplast PC221
Previous product
Next product
Flocrete SP90
 

Flocrete
SP100

HIGH RANGE WATER-REDUCING SUPERPLASTICISER ADMIXTURE
 
Advantages:
  • Optimizes cement utilization
  • Improves the water impermeability characteristics of concrete mix
  • Improves the slump retention characteristic
  • Increases the durability and resistance to aggressive atmospheric conditions
  • Improves the early and ultimate compressive strengths
  • Minimizes segregation and bleeding problems by improving the cohesion of concrete mixes
Description:

Flocrete SP100 is a high range water-reducing admixture formulated from selected polymers specially designed to enable the water content of the concrete to perform more effectively.

This effect can be used to improve workability, to increase ultimate strength or to facilitate a reduction in the cement content while sustaining mix properties.

Usage

  • Acts as high range water reducer for the production of high strength and high performance concrete
  • Improves the cohesion of concrete for using in mass concrete pours and piling
  • Structures with congested reinforcement

Materials Supplied

Flocrete SP100 is available in 5 gal (19 litre) containers as well as 275 gal (1,041 litre) and 330 gal (1,249 litre) IBC totes. Bulk supply in tanker trucks is also available upon request. 

Shelf Life

Flocrete SP100 has a shelf life of 12 months from date of manufacture if stored at temperatures between 35˚F and 122˚F (2°C and 50°C).

Application Instructions

Flocrete SP100 should be added to the concrete with the mixing water to achieve optimum performance.

An automatic dispenser should be used to dispense the correct quantity of Flocrete SP100 to the concrete mix.

DOSAGE

The  recommended dosage  of  Flocrete SP100   is  8 to 16 fl oz/100 Ib  (520 - 1,040 ml/100 kg) of cement or cementitious materials in the mix including GGBFS, PFA or micro-silica.

Representative trials should first be conducted to determine the optimum dosage of Flocrete SP100 to meet the performance requirements by using the materials and conditions in actual use.

EFFECTS OF OVER DOSAGE

Overdosage of Flocrete SP100 will cause the following:

  • - Significant increase in retardation.
  • - Increase in workability.
Ultimate concrete strength will not be adversely affected and will generally be increased provided that proper concrete curing is maintained.

HEALTH AND SAFETY

Flocrete SP100 is not classified as a hazardous material. Flocrete SP100 should not come into contact with skin and eyes.

In case of contact with eyes, immediately flush with plenty of water and seek medical attention.

GENERAL GUIDANCE

This data sheet is for general guidance purposes only and may contain information that is inappropriate for certain conditions of use. Accordingly, all recommendations and suggestions are made without guarantee. Further information is available from our Technical Department.



Download file




Connect with Don Construction Products


  Complaints Record Form

  Customer Satisfaction

Name *
Email *
Phone
Address
Subject
Request  
Security Code *

Don Construction Products Inc.

Headquarters
2826 Lineberger Industrial Dr.
Lancaster, SC 29720

Tel: +1 803 286 5430
Fax: +1 803 286 5432

E-mail: info.usa@dcp-int.com