Flocrete
RP150

WATER REDUCING AND SET RETARDING ADMIXTURE

Advantages:

Optimizes cement utilization
Improves the water impermeability characteristics of concrete mix
Improves the workability of concrete mix
Improves compressive strengths
Minimizes segregation and bleeding problems by improving the cohesion of concrete mixes

Description:

Flocrete RP150 is a normal range water reducing and set retarding admixture. Flocrete RP150 is specially formulated to enable the water content of the concrete to perform more effectively and improve the setting and finishing characteristics of concrete mixes.

Usage

Production of high-quality concrete of improved durability and lower permeability
Hot weather concreting
Applications where slump retention performance is required
Architectural concrete applications

Materials Supplied

Flocrete RP150 is available in 5 gal (19 litre) containers as well as 275 gal (1,041 litre) and 330 gal (1,249 litre) IBC totes. Bulk supply in tanker trucks is also available upon request.

Shelf Life

Flocrete P10 has a shelf life of 12 months from date of manufacture if stored at temperatures between 35 ˚F and 122˚F (2°C and 50°C).

Application Instructions

Flocrete RP150 should be added to the concrete with the mixing water to achieve optimum performance.

An automatic dispenser should be used to dispense the correct quantity of Flocrete RP150 to the concrete mix.

DOSAGE

The recommended dosage of Flocrete RP150 is 5 to 13 fl oz/100 Ib (325 - 848 ml/100 kg) of cement or cementitious materials in the mix including GGBFS, PFA or micro-silica.

Representative trials should be first conducted to determine the optimum dosage of Flocrete RP150 to meet the performance requirements by using the materials and conditions in actual use.

EFFECTS OF OVER DOSAGE

Overdosage of Flocrete RP150 will cause the following:

- Significant increase in retardation.
- Increase in workability.

Ultimate concrete strength will not be adversely affected and will generally be increased provided that proper concrete curing is maintained.

HEALTH AND SAFETY

Flocrete RP150 is not classified as a hazardous material. Flocrete RP150 should not come into contact with skin and eyes.

In case of contact with eyes, immediately flush with plenty of water and seek medical attention.

GENERAL GUIDANCE

This data sheet is for general guidance purposes only and may contain information that is inappropriate for certain conditions of use. Accordingly, all recommendations and suggestions are made without guarantee. Further information is available from our Technical Department.