Hyperplast
PC222S

New generation hyperplasticising admixture for extended slump retention for hot climates

Advantages

Increased compressive and flexural strength.
Excellent slump retention.
Optimizes cement utilization.
Better durability and impermeable concrete.
Improves shrinkage and creep behaviors.

Description

Hyperplast PC222S is a water reducing admixture with excellent slump retaining properties based on polycarboxylic polymers with selective additives which are especially formulated to enable the water content of the concrete to perform in a more effective manner.

This effect can be used in ready-mix concrete where slump retention, high strength and durability are required in hot climates or where it is required to keep the water to cement ratio at a minimum level and to maintain excellent workability.

Packaging

Hyperplast PC222S is available in 275 gal (1,041 litre) and 330 gal (1,249 litre) IBC totes. Bulk supply in tanker trucks is also available upon request.

Shelf Life

Hyperplast PC222S has a shelf life of 12 months from date of manufacture if stored at temperatures between 35°F and 122°F (2°C and 50°C).

Standards

Hyperplast PC222S complies with ASTM C494, Type D and G, depending on the used dosage .

Applications

Hyperplast PC222S can be successfully used in the following applications:

Use in concrete where extended slump retention in hot weather is required.
Acts as high range water reducer for the production of high strength and high performance concrete.
Suitable for normal weight and light weight concrete.
In ready-mix, precast and pre-stressed applications.
Production of self-levelling concrete.
Mass-concrete pours.