Formcoat
WB250

WATER BASED, BIODEGRADABLE FROMWORK RELEASE AGENT

Advantages:

100% natural organic chemical release agent–biodegradable, non toxic and environmentally-safe
Used for direct and delayed release for all types of concrete
Non-staining release for architectural concrete
Helps prevent blowholes, pinholes, bug holes and air voids
Leaves no residue on concrete a􀅌 er forms are stripped and surface dusting
Solvent-free, does not contain diesel oil, kerosene, waxes or silicones
Ready-to-use, easy to work

Description:

Formcoat WB250 is a premium environmentally-safe form release agent based on organic vegetable oils. It is ready for use, 100% biologically degradable, chemically reactive and soluble in water. Formcoat WB250 contains corrosion inhibitors.

Formcoat WB250 ensures high quality, fair faced and stain free concrete with excellent surface finish.

Usage

Formcoat WB250 is a release agent for wooden, plastic and metal molds. It is ideal for use in concrete precast plants.

Formcoat WB250 provides easy form stripping, produces concrete surfaces that are stain-free, smooth and non-dusting and minimizes form clean-up time and maintenance costs.

Materials Supplied

Formcoat WB250 is available in 5 gal (19 litre) containers as well as 275 gal (1,041 litre) and 330 gal (1,249 litre) IBC totes. Bulk supply in tanker trucks is also available upon request.

Coverage

1,220 to 2,850 ft² per gal (30 to 70 m²/litre) depending on formwork types and type of application.

Storage

Formcoat WB250 should be stored in closed containers away from direct sunlight between 41˚F to 95˚F (5˚C and 35°C).

Shelf Life

Formcoat WB250 has a shelf life of 9 months from the date of manufacture if stored in proper conditions and sealed drums.

Application Instructions

SURFACE PREPARATION

Formwork must be cleaned of surface deposits, rust, concrete, oil or other materials. Inadequate cleaning may lead to surface blemishes. Coating new timber formwork with a polyurethane sealer will protect the formwork, increase service life and improve concrete surface finish.

APPLICATION

Formcoat WB250 can be applied using roller, brush, sponge or spray application. Non-absorbent surfaces require a single application.

New, unsealed, timber surfaces may need recoating if the first application is absorbed into the timber. If the product is over applied, excess material should be drained and then carefully removed using a sponge or a cloth.

HEALTH AND SAFETY

Wear rubber gloves and protect eyes with goggles. Wash hands and skin with soap and water immediately after accidental contact.

In case of contact with eyes rinse immediately with plenty of water and seek medical advise.

GENERAL GUIDANCE

This data sheet is for general guidance purposes only and may contain information that is inappropriate for certain conditions of use. Accordingly, all recommendations and suggestions are made without guarantee. Further information is available from our Technical Department.