Setseal
AW309

Multipurpose acrylic based concrete curing compound

Advantages

Recoatable.
Non-degradable, single component.
Enhanced concrete durability.
Increase the surface abrasion.
UV resistance.
Helps achieve concrete desired strengths.
Minimizes potential surface cracking and shrinkage.
Promotes a harder dust free surface.
Can be spray applied to reduce labor cost.
Non toxic.

Description

Setseal AW309 is a single component, acrylic resin based curing compound designed to impregnate concrete surfaces combining the benefits of a curing compound and hardener.

Setseal AW309 is designed to overcome drawbacks of many commonly used curing membranes that tend to provide a limited service life following the curing period of new concrete. It has good abrasion resistance and is compatible with several types of coatings.

Packaging

Setseal AW309 is available in 5 gal (18.9 ltr) pails, 55 gal (208.2 ltr) drums and 275 (1041 ltr) totes.

Coverage

The recommended coverage rate is 200 􀅌 ²/gal (4.9 m²/liter) applied in one coat.

Storage

Store in a dry area out of direct sunlight at temperatures between 41°F and 95°F (5°C and 35°C).

Shelf Life

Setseal AW309 has a shelf life of 12 months from date of manufacture if stored in proper conditions in un-opened drums.

Standards

Setseal AW309 complies with AASHTO M-148 and ASTM C309, Type I and II, Class A and B.

Applications

Setseal AW309 is mainly used for newly cast concrete and cementitious surfaces that contain GGBFS, PFA, microsilica, dry shake hardeners or limestone to retain sufficient moisture to ensure full hydration of the cement.

Typical application areas include: